21-88 3.25" oil cap used on the new style Dexter 10k General Duty axles Uses 111606 o-ring and 111607 plug
Fits quality running gear 3,500 lb. idler or drum brake axles
Gooseneck Hitch for: 2001-2010 Chevrolet & GMC 2500 Heavy Duty Trucks 2007-2010 Chevrolet & GMC 3500 Trucks (With 1 bed cross member over the axle) Notes: Photo does not represent actual product. Product will be similiar to photo
Gooseneck Hitch that fits: 1999-2010 Ford F250 & F350 Trucks 2008-2010 F450 with factory installed bed Notes: Photo does not represent actual product. Product will be similiar to photo
Gooseneck hitch that fits: 2011-2016 Ford F250 & F350 Super Duty Trucks 2011-2016 F450 with factory installed bed Notes: Photo does not represent actual product. Product will be similiar to photo
Gooseneck Hitch that fits: 2017 Ford F250 & F350 4-Wheel Drive Super Duty Trucks 2017 Ford F450 4-Wheel Drive with factory installed bed Notes: Photo does not represent actual product. Product is similiar to photo
Gooseneck hitch that fits: 2013 Ram 2500 Diesel Trucks 2010-2012 Ram 2500 & 3500 Diesel Trucks 2003-2009 Dodge 2500 & 3500 Gas or Diesel Trucks Notes: Photo does not represent actual product. Product will be similiar to photo
Gooseneck hitch that fits: 2013-2017 Ram 3500 Trucks Notes: Photo does not represent actual product. Product will be similiar to photo
Gooseneck hitch that fits: 2014-2017 Ram 2500 Trucks Notes: Photo does not represent actual product. Product will be similiar to photo
single diode marker light with grommet for 3/4" hole. Amber
This is the most common coupler used on PJ Trailers with a 2-5/16" bumper pull coupler Bulldog 2-5/16" Adj. height coupler Fits our 14k bumper pull trailers with channel mount on tongue Heavy duty cast head Wedge latch system Uses 2, 5/8 X 5" grade 8 bolt and lock nuts. (Not included) Typically ships unpainted
1.75" wide 25.25" long
Hanger Kit Tandem Axle Double Eye 3500 or 5200 lb axles
This gooseneck hitch fits 2011-2015 Chevrolet & GMC 2500 & 3500 Heavy Duty Trucks.
This is a gooseneck hitch for a 2016-2017 Chevrolet & GMC 2500 & 3500 Heavy Duty Trucks Notes: Photo does not represent actual product. Product will be similiar to photo
Alko part # K363587
This Plug fills the center hole in the plastic oil caps made by quality running gear and Dexter.
Does NOT include o-ring or plug.
Dexter Heavy Duty 10K &12K & 15K Complete oil cap with center plug and o-ring This will fit the pre-2010 10k general duty axle also WILL NOT the new one piece 10K GD hub and drum This will fit just about all PJ 12K Dexter axles, PJ 15K Dexter axles, and also DISC BRAKE 10k Dexter axles 111608x1; 111609x1 & 111607x1
4" O.D. oil cap used for 10k heavy duty -15k Dexter axles .
Kit contains: 005-101-00 Tang Washer x 1 010-019-00 Grease Seal x 1 019-002-00 Cotter Pin x 1 031-031-01 Cup x 1 031-031-02 Bearing Cone L4 x 1 031-033-01 Cup x 1 031-033-02 Bearing Cone L6 x 1
Industrial-Strength 2 Watts, 250mA Solar Panel Clean, Quiet Energy for All 12-Volt Lead-Acid Batteries Pulse Technology Cleans Battery Plates for Maximum Power Batteries Last Up To 3X Longer! Panel Mounts Flat Virtually Indestructible Very easy installation These are typically mounted to a toolbox lid with 4 screws. These connect directly to the battery with 2 ring terminals. This is the Solar charger that will come from the PJ Factory when a trailer is ordered with the solar charger option. Commonly used with PJ Trailer models D5, D7, D9, DL, D8, DJ, DS, DD, D2, FY, LY, SY, T1, TH, T5, T6, TF, T7, T8, T9, TD, Powertails, Hydraulic Jacks, Winches, etc. This is a great solar charger for any trailer with a 12v battery.
Includes: oil cap, o-ring and plug
This is the pump that will work on all Hydraulic dumps, tilts, jacks, dovetails, that are made by PJ. Since @2014 the only trailers these are used in are the TDD and the TD models. In 2014 we started using the same pump with the smaller reservoir for all other applications. 6 Quart Plastic Offset Reservoir 12V DC, (2) Terminal, Electric Motor 12V DC Heavy duty plastic start solenoid switch /100 amp Cartridge relief valve, Adjustable set 4W2P Spool type cartridge soleniod valve 10V DC #8 Cylindrical coil w/ Dual spade NC 2-WAY and P.O.C in 4-WAY Cartridge valve Secondary relief valve w/ side exhaust ports. Set at 1500 PSI SAE #6 (9/16-18) Plastic shipping plug Pressure loaded gear pump (0.1324 INÂ³/R) KTI 3/4 NPT 40 Micron air breather 2 Button 4-Wire Remote Pendant w/ Cylindrical Quick Disconnect 15' Cord Warning Label Tag, Yellow, Torgue Spec RVSAE6-30 @ 1500 PSI. Perfect replacement pump for 12VDC remotely controlled hydraulic systems Perfect for Dump Trailers - Lift Gates!! Length 21.5" x Height 8" x Width 8"
Binder, lever chain 3/8"
Spring for Fold-up Gate, L or R